3mm(2.85mm) & 1.75mm PLA (Polylactide)
1 kg (2.2 lbs) 3D printer filament
Manufactured with 100% virgin materials
For use with 3D printers such as Makerbot, Reprap, Printrbot jr.,
Makerfarm Prusa i3, MendelMax, Ultimaker, UP! 3D, Flashforge,
solidoodle, afinia, lulzbot taz3/4, makergear, re;3D gigabot, cosine additive,
titan robotics, or any other printer accepting 1.75mm or 2.85mm PLA filament.
Suggested Temperature settings:
Hotend - 190-220 degrees C
Bed - Kapton or blue painters tape
Meets quality standard of +/- .05mm
All filament is wound onto a standard black reel, shrink wrapped with desiccant,
and vacuum sealed.