ULTEM 1010

ULTEM™ 1010 PEI (Polyetherimide) 3D Printing Filament

Available NOW!

The ultimate engineering thermoplastic, made from Sabic ULTEM 1010 Resin. Unmatched strength, thermal stability, and bio-compatibility. 

This is an experimental filament that will require high temps on both the nozzle and bed. 

**Currently only 1.75mm available 

Recommended Print Conditions:

  • Extruder Temp:  350°C+
  • Bed Temp:  150°C + (the hotter the better)
  • Bed Prep:  PC or PEI sheet



 ultem 1010


Type: Unknown Type